User Manual

Package Contents

• 1× Hybrid Phone Case (TPU + Polycarbonate + Aluminium ring)

Installation Instructions

1. Clean your phone with a dry, lint-free cloth.
2. Slide the bottom edge of your Solana Seeker into the TPU frame.
3. Gently press the top corners until it fits snugly.
4. Ensure proper fit: All cutouts and buttons should align perfectly.

Removal Instructions

1. Hold the phone face-down.
2. Push from the camera corner to release one top edge.
3. Carefully work around the sides to remove the case.

Care Instructions

• Clean using a soft, dry or lightly dampened cloth only.
• Avoid abrasive materials, alcohol-based cleaners, or harsh chemicals.
• Do not scratch or scrape the printed surface.
• Keep away from prolonged direct sunlight to prevent discoloration.

Safety & Warnings

• The phone case does not make your phone waterproof or water-resistant.
• Keep away from open flames, high heat, or direct heat sources. Exposure can cause the adhesive, TPU frame, and polycarbonate materials to deform or melt.
• This product is not a toy. Keep away from small children.
• Do not attempt to modify or forcibly bend the case.
• Keep sharp objects away from the UV-printed surface.

Recycling & Disposal

Dispose of responsibly under the EU WEEE Directive 2012/19/EU. Recycle at authorized electronics collection points.

Materials

• Sides: Thermoplastic Polyurethane (TPU)
• Backplate: Polycarbonate (PC)
• Camera Protector: Anodized Aluminum
• Print Surface: UV-Cured Ink (solvent-free, non-toxic when cured)

Brand & Compliance